حذف 16 اولیه srf01

[alime]

این دیتاشیت سنسور srf01 هستش که من خیلی سعی کردم بفهمم چطور این 16 سانت حذف میشه اما نتونستم

Advanced Mode
This is the factory default mode. In this mode it is possible for the SRF01 to measure range all the way down to zero. Initially, the minimum range the SRF01 can detect is around 18cm or 7 inches. For the SRF01 to be able to measure all the way down to 0cm, it acquires a precision crystal lock on the transducer's characteristics. This happens after 5 rangings have been completed with 30cm or more of free space in front of the sensor. When this happens the "lock" bit is set (bit 0 in the status byte) and the SRF01 can measure from 0 to 600cm (0-6meters).
During operation the SRF01 maintains the transducer lock automatically, provided it gets an occasional (every few minutes) set of 5 consecutive rangings of greater than 30cm. The "lock" state of the SRF01 can be checked in by reading the "Lock" bit, which is bit 0 in the status register. A high (or logic 1) indicates transducer lock has been achieved and the SRF01 will work down to 0cm. Where the SRF01 is not able to maintain its lock, it will release it (lock bit = zero) and re-acquire it as soon as possible.

تو برنامه نویسی چه کار خاصی باید انجام بدیم؟
این قضیه 30 سانت چیه گفته؟

[hamed_naghdi]

سلام
شرمنده اگه شما تونستید راه بندازینش (اگه 16 سانت هم نشد نشد) لطفا با من یه تماس یا sms بدین ، خواهش میکنم خیلی واجبه برام

09388238191